Product Details

1084 Classic Mic Pre 3 Band EQ

1084 80 Series Module for Vintage Neve Console Retrofit and Heritage Audio 80 Series Racks

Product Details
It is also compatible with the Heritage Audio Frame 8 and Rack 2 powered enclosures. Special care has been taken in sourcing the correct components that ensure performance will be as close to a 1070s unit as it is possible nowadays. Custom polystyrene and film tone capacitors have been developed to closely match the Siemens Styroflex and Mullard Mustard types of the late 60s and early 70s. Custom input transformers have also been co designed with Carnhill Transformers′ Oxford factory to our special requirements. The Heritage Audio 1084 is entirely handmade in our facilities in Spain, employing the same old-fashioned wiring and soldering techniques of the 70s. All its circuitry is held into five plug in cards.
Technical Specification
Microphone input impedance HI, 1200 Ohm minimum, LO, 300 Ohm minimum. Higher gain positions gradually have greater impedances, optimum for low gain ribbon mics. Input is transformer balanced and floating. Line input impedance: 10KOhms bridging, transformer balanced and floating. Output impedance: Less than 75 Ohms, transformer balanced and floating, to drive a load of 600 Ohms. Maximum output: Greater than +26dBu into 600 Ohms, THD: Less than 0.025% at 1Khz, Less than 0.05% at 100Hz. Frequency response :20Hz (+0.3dB) to 20Khz (-0.2dB). Maximum Gain: Slightly greater than 80dB. Noise: Less than -100dBu. Power consumption: Less than 110 mA @24VDC.
国内外彩票大奖排行榜 网上的极速快3是否合法 体彩排列5杀号技巧 今晚广东36选7开奖号码 基金配资贷款的英文翻译 湖北11选五5中奖规则 海南够力七星彩排列五软件 爱策略 广东十一选五什么时候开 黑龙江22选5开奖时间 吉林快三和值大小单双走势图